User Manual

www.insigniaproducts.com
19
NS-SCR79KIT
4 Press or to close the menu or press  to return to the option list.
Adjusting the treble or bass
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Press
 or  to select Treble or Bass, press  or  to adjust the option, then press OK.
3 Press or to close the menu or press
 to return to the option list.
Adjusting the balance
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Make sure that the Sound Mode is set to User. See Selecting the sound mode
on page 18.
3 Press
 or  to select Balance, then press OK.
4 Press
 or  to adjust the balance between 0 to 50, then press OK
5 Press or to close the menu or press
 to return to the option list.
Turning the Auto Volume control on or off
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Make sure that the Sound Mode is set to User. See Selecting the sound mode
on page 18.
3 Press
 or  to select Auto Volume, then press OK to toggle between Off and On.
4 Press or to close the menu or press
 to return to the option list.
Setting the sleep timer
1 Press (menu) on the remote or (menu) on the top of your projector. The PICTURE menu opens.
2 Press
 or  to select the TIME menu, then press OK.
Note: To adjust the other sound options, you must set Sound Mode to User. The other picture modes are preset and can’t be
changed.