User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Package contents
- Components
- Setting up your projector kit
- Connecting devices
- Positioning your projector
- Using your projector
- Turning your projector on and off
- Selecting the video source
- Adjusting the picture
- Adjusting the contrast
- Adjusting the brightness
- Adjusting the tint
- Adjusting the color temperature
- Selecting the aspect ratio
- Adjusting the noise reduction
- Adjusting the display size
- Selecting the sound mode
- Adjusting the treble or bass
- Adjusting the balance
- Turning the Auto Volume control on or off
- Setting the sleep timer
- Selecting the OSD language
- Restoring factory defaults
- Rotating the picture
- Updating the USB software
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
6
Remote control
NO. COMPONENT DESCRIPTION
1 (power) Press to turn your projector on and off.
2 (fast rewind) Press to fast rewind video from an external device.
3 OK Press to confirm menu selections.
4 (return) Press to go back to the previous screen.
5 (volume down) Press to decrease the volume.
6 (mute) Press to mute or unmute the sound.
7 (play/pause) Press to start or pause playback.
8 (fast forward) Press to fast forward video from an external device.
9 (arrows) Press to navigate in menus.
10 (menu) Press to open or close the menu.
11 (source) Press to select an external video device.
12 (volume up) Press to increase the volume.
CAUTION: Do not expose the remote to rain or other wet conditions.
Notes:
• Always point the remote at the remote sensor on the front or back of your projector.
• Make sure that there are no obstacles between the remote and the remote sensor.
• The remote works up to a distance of 13 ft. (4 m).
• Remove the batteries if you don't plan to use your projector for a long time.
• Replace the batteries with new batteries when the current batteries are exhausted.
• Store the remote in a cool and dry environment.
NS-6CR79KIT