User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Package contents
- Components
- Setting up your projector kit
- Connecting devices
- Positioning your projector
- Using your projector
- Turning your projector on and off
- Selecting the video source
- Adjusting the picture
- Adjusting the contrast
- Adjusting the brightness
- Adjusting the tint
- Adjusting the color temperature
- Selecting the aspect ratio
- Adjusting the noise reduction
- Adjusting the display size
- Selecting the sound mode
- Adjusting the treble or bass
- Adjusting the balance
- Turning the Auto Volume control on or off
- Setting the sleep timer
- Selecting the OSD language
- Restoring factory defaults
- Rotating the picture
- Updating the USB software
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
7
NS-SCR79KIT
Setting up your projector kit
1 Place the carrying case on a flat surface with the logo facing upward.
2 Open the carrying case, then remove the foam packaging that holds all the parts.
3 Pull up the two bottom poles. These poles are hinged and permanently attached to the carrying case.
4 Insert one A pole into both ends of the bottom poles.
Note: The A, B, C, and D poles are labeled for easy identification.
Foam packaging
Bottom pole
Bottom pole