USER GUIDE 55" Black Standing Desk NS-SDSKB553 Before using your new product, please read these instructions to prevent any damage.
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55" Black Standing Desk Features • • • • • Adjusts electronically up to 48.4 in. (123 cm) to move between standing and sitting Easy to access switch effortlessly raises or lowers the desk height Memory function remembers up to four different height positions Steel frame with particle board tabletop provides a stable work surface and holds up to 110 lbs. (50 kg) Hardware included for quick and easy assembly Dimensions 55.1 in. (140 cm) 27.6 in. (70 cm) 28.7 in. ~ 48.4 in. (73 cm ~ 123 cm) www.
Parts included 1 Tabletop (1) 2 Column (2) 5 Switch (1) 4 Cable tie (4) 3 Foot (2) 7 Adapter cable (1) 6 Adapter (1) 9 Switch screw (3) 8 Power cable (1) Hardware included LABEL PART A QTY LABEL 4 C 4 Long hex-head screw QTY 1 4 × 4 hex wrench Short hex-head screw B PART 8 D www.insigniaproducts.
5" Black Standing Desk Preparing to assemble your desk 1 Make sure that all parts and hardware are included. 2 To prevent product damage, assemble your desk on a carpet. 3 Have another person help you with lifting and assembly. 4 For the best results, do not fully tighten the screws until you have assembled all the other parts.
3 Rotate the column counter-clockwise until the column hooks are under the pre-installed screws on the tabletop. 4 Insert two short hex-head screws (A) through the screw holes on the column and into the tabletop. Tighten the screws with the 4 × 4 hex wrench (C). 5 Repeat these steps to install the other column. www.insigniaproducts.
55" Black Standing Desk STEP 2: Install the feet: B Long hex-head screw (8) C 4 × 4 hex wrench (1) 3 Foot (2) 1 Align the screw holes on the bottom of one foot (3) with the screws on the end of the column. 2 Insert four long hex-head screws (B) through the holes on the foot and into the holes on the column, then tighten the screws with the 4 × 4 hex wrench (C). 3 Repeat these steps to install the other foot. www.insigniaproducts.
STEP 3: Install the switch You need: 9 Switch screw (3) 5 Switch (1) 1 Place the switch (5) on the tabletop with the buttons facing the front of the tabletop. Align the screw holes in the switch with the screw holes in the tabletop. 2 Insert three switch screws (9) through the holes on the switch and into the holes on the tabletop. Tighten the screws with the 5 × 5 hex wrench with Phillips head (D). Front 8 D 5 × 5 hex wrench with Phillips head (1) www.insigniaproducts.
55" Black Standing Desk STEP 4: Install the adapter You need: 6 Adapter (1) • Slide the adapter (6) into the adapter bracket. Make sure that the adapter connector points to the nearest column. Note: For clarity, the adapter shown below is viewed from the switch side of the tabletop. Adapter bracket Adapter bracket www.insigniaproducts.
STEP 5: Connect and tie down the cables You need: 7 Adapter cable 8 Power cable 4 Cable tie (4) 1 Plug one end of the adapter cable (7) into the adapter connection, then plug the other end of the cable into the DC IN port on the switch. 2 Plug the motor cable on the bottom of the tabletop into the M1 port. Motor cable 10 www.insigniaproducts.
55" Black Standing Desk 3 Plug the power cable (8) into the connector on the adapter. 4 Open a cable tie (4), slide the base of the tie under a cable, loop the cable tongue over the top of the cable, then slide the end of the tongue into the tie bracket. You can attach the cables to the bottom of the desktop with the provided cable ties.
Saving a height position Your can save four height positions. 1 Adjust your desk to the height you want to save. The LED shows the height for 10 seconds. 2 Press and hold a height position button (1, 2, 3, or 4) for three seconds, then release the button. The height position is saved and the LED shows S-1, S-2, S-3, or S-4. 3 To automatically adjust the height of your desk to the saved position, press 1, 2, 3, or 4.
55" Black Standing Desk Specifications Dimensions (H × W × D) Raised: 48.4 × 55.1 × 27.6 in. (123 × 140 × 70 cm) Lowered: 28.7 × 55.1 × 27.6 in. (73 × 140 × 70 cm) Weight 77.3 lbs (35.1 kg) Maximum supported weight 110 lbs. (50 kg) Maximum speed 1.0 in./s (25 mm/s) Lowest position 28.7 in. (73 cm) Highest position 48.4 in. (123 cm) Column stage 2 stage: (outer tube and inner tube) Power supply AC100 V - 240 V, 50/60 HZ Operating environment 32° to 104° F (0° to 40° C) www.
ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.
