Manualshelf

User Guide

ManualsBrandsInsignia ManualsOutdoor Lighting48 Ft. Outdoor String Lights - White
12
REPLACING LIGHT BULBS
WARNING - RISK OF ELECTRIC SHOCK!!!
Disconnect power at the source prior to replacing a light bulb or fuse. For
outdoor string lights, do NOT replace light bulbs/fuse during rain or when wet.
Replace light bulbs/fuse only during dry and calm weather conditions.
1 Lightly hold the bulb you want to replace in one hand, then twist the
bulb counterclockwise.
Note: The bulb may be tight in the socket. This is normal to prevent moisture
from getting into the socket.
2 Screw the replacement bulb into the socket clockwise until the top of
the socket forms a tight seal around the bulb and the bulb makes solid
contact with the socket.
ADDING A LIGHT STRING
Note: You can add up to 28 string light sets.
1 Unplug the rst light string.
2 Remove the cap from the female end and insert the power plug on
the second string into the power outlet on the rst string.
Note: Tightly cap the female end when not in use.
Attach to a structure
1 Attach screw hooks (not included) into the structure where you want
your string light. The screw hooks should be no less than 10 ft. (3 m)
apart.
2 Attach the plastic loops on the end of the lights to the screw hooks.
3 Plug the lights into a grounded outlet.
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• Add accent lighting to your patio, garden, balcony, and more (for
outdoor use)
• 15 bulbs (plus 2 spare bulbs) on a 48 ft. (14.6 m) string illuminate any space
• 2200 K warm white lights make for a relaxing atmosphere
• Shatterproof LED bulbs withstand severe weather conditions and
accidental drops
• Built-in hanging sockets provide exible mounting options
• Supports end-to-end connection of up to 28 strands for added length
• Commercial-grade and UL rating grants outdoor, year-round use
CONNECTING YOUR STRING LIGHTS
Attach to a guide wire
1 Run a guide wire (not included) in the location where you want your string
light.
2 Attach an S hook or temporary tie (not included) through the plastic loop
on the end of each light.
3 Attach each plastic loop to the guide wire.
4 Plug the lights into a grounded outlet.
QUICK SETUP GUIDE
48ft Outdoor
String Light
NS-STRL48FT3
S hook
Guide
wire
PACKAGE CONTENTS
• String light
• Replacement bulbs (2)
• Replacement fuse
• Quick Setup Guide
Plastic loop
Screw hooks
10 ft. (3 m)
Plastic loop
Additional
string lights
Cap

Summary of content (2 pages)