User Manual
Table Of Contents
- Contents
- Introduction
- IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
- Features
- Unpacking your washer
- Choosing a location
- Installing your washer
- Using your washer
- Maintaining your washer
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
14
NS-TWM16WH9
www.insigniaproducts.com
• Remove the packing box and lift the washer up and away from the foam base
cushion. Open the lid of the washer to take out all accessories including the
protective foam.
Choosing a location
For best performance, you must install your washer on a solid, level floor.
Wooden floors may need to be reinforced to minimize vibration or
unbalanced load situations.
Carpeting and soft tile surfaces can contribute to excessive vibration,
which can cause your washer to move slightly during the spin cycle.
Warning:
• Do not install your washer in areas where water may freeze, because your washer
always retains some water in its water valve, pump, and hose areas. Frozen water
can damage the belts, pump, hoses, and other components.
• Never install on a platform or weakly supported structure.
Foam base
cushion
Protective
foam