User Manual

35
1.6 Cu. Ft. Portable Top-Load Washer
www.insigniaproducts.com
Understanding the error codes
Your washer is equipped with an automatic error-monitoring system to
detect and diagnose problems at an early stage.
Specifications
Clothes are
staining
• Remove your clothes from the washer as soon as the cycle is
complete.
• Always wash dark colors separately from light colors and
whites.
• Never wash heavily-soiled clothes with lightly-soiled clothes.
Clothes are
wrinkling
• Remove your clothes from the washer as soon as the cycle is
complete.
• Do not pack your clothes tightly into the washer. The lid should
close easily.
• Make sure that the water hoses are connected to the correct
water inlets.
ERROR
CODE
POSSIBLE CAUSE SOLUTIONS
E1 Your washer takes more than
30 minutes to fill with water.
After water finishes entering
your washer, the water level has
not changed in five minutes.
• Make sure that the lid is not open.
• Make sure that water is not leaking.
See No water or not enough water
on
page 33.
• Contact Insignia Customer Care.
E2 The unit takes more than 10
minutes to drain.
• See Washer does not drain or spin
on
page 34.
E3 The lid is open.
The washer is not level.
• Close the lid.
• Level the washer. See “Step 6: Level
your washer” on page 25.
E4 Your washer is out of balance
more than three times in spin
operation.
• See Washer vibrates or is too noisy
on
page 33.
• Contact Insignia Customer Care.
Dimensions
(H × W × D)
36.6 in. x 20.3 in. x 20.7 in
(93 cm × 51.5 cm × 52.5 cm)
Weight 75 lbs. (34 kg)
Power 120 V~/60 Hz
Current draw 6 A
Volume of inner tub 1.6 Cu. Ft.
Pulsator type Impeller
Display type LED
Display color Blue
Motor Series
PROBLEM SOLUTION