User Manual

INSTALLATION INSTRUCTIONS
28
www.insigniaproducts.com
3 If your washer isn’t level, carefully tilt your washer just enough to adjust the
two leveling feet on the bottom of the front of your washer. Extend the feet
only as much as is necessary. If the feet are extended too much, your washer
may vibrate.
Step 5: Power your washer
Plug the power cord into a well-grounded, 3-prong, 120 Volt
60 Hz approved electrical outlet, protected by a 15-amp fuse
or comparable circuit breaker. Your washer is grounded
through the third prong of the power cord.
Note: Having someone tilt your washer helps to take some weight off the
leveling feet and makes them easier to adjust.
Loosen Lock
Level