User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- SAVE THESE INSTRUCTIONS
- Features
- Unpacking your washer
- Choosing a location
- Installing your washer
- Using your washer
- Washing a load of laundry
- Setting the child lock
- Washer options and settings
- Maintaining your washer
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
16
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
2 Insert an R1 filter in the input end of both hoses, then tighten the hose and faucet fittings by hand until they are
snug. Tighten them an additional two-thirds of a turn with pliers or a wrench. Pull the water supply hoses
downwards to make sure that they are connected securely.
3 Place the unconnected ends of the hoses into a bucket and turn on the faucets connected to the water supply
hoses for 10 or 15 seconds to remove any foreign substances. Turn off the faucets.
CAUTION
: Do not overtighten the fittings or apply tape or sealant to the faucets or water supply intakes. This can
damage the fittings.
HotCold
Filter