User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- SAVE THESE INSTRUCTIONS
- Features
- Unpacking your washer
- Choosing a location
- Installing your washer
- Using your washer
- Washing a load of laundry
- Setting the child lock
- Washer options and settings
- Maintaining your washer
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
19
Top-Load Washer
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
4 Fasten the drain hose to the washer frame at the indicated locations with the provided hose clamp.
5 Position the other end of the drain hose (the loose end) in one of the following ways:
• Over the edge of a wash basin - Secure the guide to the side of the basin wall with a hook, tape it, or tie it
with a piece of cord to prevent the drain hose from moving.
• In a standpipe - The standpipe must be no shorter than 39 in. (99 cm) and no longer than 96 in. (244 cm).
CAUTION
:
Make sure that the connection between the drain hose and the wash basin, standpipe, or laundry tub is not airtight.
96 in. max
39 in. min
Hose
retainer
Tie strap