User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- SAVE THESE INSTRUCTIONS
- Features
- Unpacking your washer
- Choosing a location
- Installing your washer
- Using your washer
- Washing a load of laundry
- Setting the child lock
- Washer options and settings
- Maintaining your washer
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
20
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
• In a laundry tub - The laundry tub must be no shorter than 39 in. (99 cm) and no higher than 96 in (244 cm)
maximum.
Step 4: Level your washer
Determine if the washer is level by checking the position of the tub or by using a level.
1 Slide the washer into position.
2 Open the lid of the washer, then pour water into the tub to the leveling circle. If the washer is level the water will
touch the leveling circle all the way around. If the washer is not level, the water will only touch part of the
leveling circle.
CAUTION
:
Do not use your washing machine without leveling. If your washer is not level, it may:
• Vibrate excessively which can cause your washer to malfunction
• Make excessive noise.
• Indicate error codes E3 or E4 when the washer is running.
Extend the leveling feet only as much as is necessary. If the feet are extended too much, your washer may vibrate.
Hose retainer
Tie strap
96 in. max
39 in. min
Washer is level - the
water touches the
leveling circle all the
way around.
Washer not level - the
water does not touch
the leveling circle all
the way around.
Leveling circle
Add water to the washer until it reaches
the leveling circle. If the washer is level,
the water will touch the leveling circle
all the way around. If it’s not level, it will
only touch part of the leveling circle.