User Manual

24
www.insigniaproducts.com
OPERATING INSTRUCTIONS
2 Press the Delay button repeatedly to select the delay time you want. The delay start time, in hours, will be
shown on the display, in sequence, from 0 to 24, then back to 0. You can also press and hold the Delay button
to quickly adjust the time until the desired time appears on the display.
3 If you want to change the wash cycle settings while you are setting the delay start time, turn the cycle selector.
To return to setting the delay start time function, repeat Steps 1 and 2.
4 To cancel the delay start time function before you save the setting, press the Delay button until 0 appears on
the display, or turn the cycle selector knob.
Step 6: Start your washer
1 Press the /Start Pause button.
2 If you need to pause the cycle (for example to add or remove items or adjust the load), press the /Start Pause
button, then open the lid. Your washer stops. When you are ready to resume washing, close the door, then press
the /Start Pause button.
Step 7: Unload your laundry
When the wash cycle is complete:
•The Done light turns on
• Your washer beeps six times and flashes 11, 22, 33, 44, 55, 66 after the cycle is done.
• Your washer unlocks the lid
• Open the lid and remove the laundry.
Notes:
• Once the number of delay hours is reached by pushing the Delay button, release the button for three seconds and
it will be set. The Delay light will remain on.
• After the delay time is set, if you wish to change the delay setting, press the Delay button again until the desired
hour is reached. Release the button for three seconds and it will be set.
• If you decide to cancel the delay setting, you can either turn the cycle selector or push the Delay button until 0 is
reached.
• Ideally, you should set your cycle before setting the Delay, because turning the cycle selector after the Delay is set
cancels the delay.
• The Delay Start Time cannot be changed after the program has started.
Important: You can change settings or cancel the delay start time function anytime before you press the /Start
Pause button by turning the cycle selector.
The delay start time cannot be changed after you press the /Start Pause button.
If you pressed the /Start Pause button, you can cancel the delay start time function by pressing the /Power button
to turn off your washer, then pressing the /Power button again to turn it back on.
Note: If you have not set a delayed start time or if the delay time has expired, your washer starts the cycle and the Wash
light turns on.
As your washer moves from stage to stage in the wash cycle, the related light turns on (such as Rinse or Spin).
If you set a delayed start time, the Delay light turns on and your washer starts counting down the start time.