MOUNTING ADAPTOR SELECTION GUIDE
ADAPTABILITY IS ONE OF OUR BEST FEATURES. Our disposers include two types of stainless steel collar adaptors and a sink flange adaptor to accommodate any size sink opening. Customize your disposer and clean up operation by choosing from a variety of bowl sink assemblies designed for dish tables or drainboards. Use This Chart to Select the Correct InSinkErator Mounting Adaptor • • • • Disconnect existing disposer from sink bowl or cone. Find the diagram that matches your sink bowl or cone.
4 A C ISE Ring Adaptor # Waste King, Bus Boy 5 7/8" 6 1/2" 11327H Waste King, Bus Boy 5 7/8" 6 7/8" 11327H Normally Used By C MEASURE FROM ABOVE (INSIDE BEND ) Special Information Re-use existing clamping ring. A LOOSE RING (RE-USE) A – Diameter (sink or bowl opening) C – Diameter (inside bend) 5 C Normally Used By Hobart MEASURE FROM ABOVE (INSIDE BEND ) A A C E No.
TRUSTED BY FOODSERVICE CONSULTANTS AND EQUIPMENT DEALERS. Whether you serve 25 or 2,500 people, there is an InSinkErator disposer that’s right for you. InSinkErator Commercial Disposer Sizing Chart To determine the proper size disposer, use this recommended sizing chart. Sizing recommendations are given in general terms; actual capacities vary depending on the volume and type of food waste.