Product Brochure

Normally Used By A B
ISE Ring
Adaptor #
Special Information
ISE, Waste King, Toledo, National 4 ½" 5 " 11327A Discard previous adaptor parts.
FMC, Avant 5 ¼" 5 " 11327C Discard previous adaptor parts.
Bus Boy 6" 6 " 11327K Discard previous adaptor parts
(has 3-piece split ring).
ISE, Toledo 6" 7 " 11327B Discard previous adaptor parts.
Standard ISE mounting 6 " 7 " 11599E Discard previous adaptor parts.
National, Hobart, Toledo 7" 7 " 11327G Discard previous adaptor parts.
National mounting has ten
bolt circle on split ring.
Salvajor 7" 7 ¾" 11599A Discard previous adaptor parts
(split ring supplied).
ISE, Toledo 8" 9 ¼" 11327 Discard previous adaptor parts
(split ring supplied).
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
A
B
FLANGE
SINK MOUNT
1
Normally Used By A B E
No. of
Bolt Holes
ISE Ring
Adaptor #
Special Information
Waste King, Red Goat 4 " 6 " 5 " 6 11599 Discard previous
adaptor parts. Use
existing bolt holes.
American Delphi, Atomic 6" 7 " 6 " 6 11378D Discard previous
adaptor parts. Use
existing bolt holes.
National, Hobart 7" 8 " 8 " 10 11599B Discard previous
adaptor parts.
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
E – Diameter (bolt hole circle)
A
E
B
2
Normally Used By A B
ISE Ring
Adaptor #
Special Information
Waste King 6" 6 " 11327D Loose ring on sink not used with this adaptor
(O.D. of loose ring is 7 ½" with six bolts – 7"
bolt hole circle diameter).
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
A
B
BOLT
HOLES IN
UNATTACHED
RING
3
ADAPTABILITY IS ONE OF OUR BEST FEATURES.
Our disposers include two types of stainless steel collar adaptors and a sink flange
adaptor to accommodate any size sink opening. Customize your disposer and
clean up operation by choosing from a variety of bowl sink assemblies designed
for dish tables or drainboards.
Use This Chart to Select the Correct InSinkErator Mounting Adaptor
• Disconnect existing disposer from sink bowl or cone.
• Find the diagram that matches your sink bowl or cone.
• Measure the A and B dimensions (also C, D and E if indicated).
• Match the manufacturer and dimensions to find the adaptor number to order.