Installation Sheet

a
a
Turn off water supply.
Remove tubes from tank: At tank
top, depress gray release tab into
quick-connect fitting securing blue
or copper 1/4" tube and gently pull
line out of fitting. Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing faucet and continue
to page 6.
Turn off water supply.
Remove tubes from tank: At tank
top, depress gray release tab into
quick-connect fitting securing blue
or copper 1/4" tube and gently pull
line out of fitting. Pull white 7/16"
tube and clear 5/16" tube off fittings.
Remove existing tank and continue
to page 9.
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
Property Damage: Unplug tank
before disconnecting tubing.
IF INSTALLING ONLY NEW TANK
IF INSTALLING ONLY NEW FAUCET
5
If installing BOTH new faucet and new tank, skip to page 6.
Do not plug in the HWT-F1000S Until Step 6C. To avoid permanent damage to the
product, only operate the tank after it is filled with water.
NOTICE
NOTICE
NOTICE