Spec Sheet
Features
• Dispenses cool, filtered water
• Single hole installation
• Spout swivels 360-degrees for convenience
• Flexible connectors for easy installation
• Constructed of high quality, low lead brass
• 40° turn ceramic disc valve
• 0.75 gallons per minute maximum flow
rate at 60 psi
• For use with InSinkErator
®
filtration system
(sold separately)
• Unit not for commercial/industrial use
Finishes:
Chrome, Satin Nickel, Oil-Rubbed Bronze
and Polished Nickel
Warranty:
We Come To You
®
5-Year
In-Home Limited Warranty.
Covers parts and labor.
* The complete InSinkErator warranty is included
in the Care & Use booklet with each unit.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion, without notice or
obligation and further reserves the right to change or discontinue models.
© 2017 InSinkErator, InSinkErator
®
is a business
unit of Emerson Electric Co. All Rights Reserved.
USA
1-800-558-5700
www.insinkerator.com
Job Specifications
Dimensions
Iris
™
Cool Filtered Water
Dispenser Faucet
F-C2300
WDT525-17D-83-10
Supply
Connection
3/8”
Compression
Required
Sink Hole
Diameter
1-1/4” – 1-1/2”
Standard
Sink Hole
Required
supply
pressure
25–125 psi
(172–862 kPA
or 1.7–8.6 bar)
Backsplash
Clearance
Minimum
2” required
from sink
hole center to
backsplash
Counter
Thickness
Maximum
of 3”
1/4" Incoming
Water Supply
2-1/4"
12-1/ 2"
Cold Side Water Supply
9"
5-3/4"
5-1/ 2"
2
3
/
4
"
2
1
/
4
"