Specification

HOT250
Job Specifications
Specifications
1-800-558-5700
www.insinkerator.com
WDT587-23D-83-10
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
®/TM © 2023 InSinkErator. All rights reserved.
Features
FAUCET
• Hot water faucet
• Self-closing hot valve for automatic
shut off
• Handle moves forward to avoid
hitting backsplash
• Spout swivels 360° for convenience
• Durable metal construction
TANK
• Includes 2/3-gallon hot water tank
• Easy to adjust temperature control
from 160°F to 210°F
• Tool-free tank connections and dry
start protection
• 115 volts, 750 watts, 6.5 amps
Finishes
Chrome • Satin Nickel • Matte Black
Warranty
We Come To You
®
3-Year In-Home Limited
Warranty. Covers parts and labor.
* The complete InSinkErator warranty is included in the
Instruction Care & Use manual with each system.
Certifications
NSF/ANSI 372
ADA Compliant
NSF/ANSI/CAN 61 Q ≤ 1
Supply
Connection
1/4” 3/8” T Fitting or
Angle Stop Valve
Required Sink
Hole Diameter
1 3/8”
Required Supply
Pressure
15 psi - 80 psi
(1 bar – 5.5 bar;
103 kPa –552 kPa)
Counter
Thickness
Maximum of 3” (7.62cm)
Capacity
2/3 Gallon Hot Water
Tank
Electrical
115 volts A.C., 750
watts, 6.25 amp heating
element with grounded
three (3) prong plug
Thermostat
Snap-action, adjustable
from 160˚F to 210˚F
(factory pre-set
at 200˚F. Actual
temperature may
vary slightly.)
Shipping Weight 8.03 lbs
H250C-SS H250SN-SS H250MBLK-SS
Dimensions
Instant Hot Water
Dispenser System
Hot Water
Supply Line
Vent Tube
Inlet Tube
Outlet Tube
2.97” (7.54cm)
8.21”
(20.85cm)
10 7/8”
(27.62cm)
6.12”
(15.56cm)
Length:
6.75”
(17.15cm)
1/4” 3/8”
T Fitting