HWT-00 Spec

10-7/8"
6-1/8"
6-3/4"
Stainless Steel Tank dispenses
near-boiling 200˚F water instantly
Water dispenser and filtration sold separately
Model
HWT-OO
Submittal Sheet
Job Specifications
Specifications
Instant Hot Water Dispensers
HWD492-16C-83-10
Dimensions
• 2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hour of near-boiling water
• 115 volts, 750 watts, 6.5 amps
• For use with InSinkErator
instant hot water dispensers
(excluding model Hot1 and Hot100)
• Unit not for commercial/industrial use
Capacity
Thermostat
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
Electrical 115 volts, A.C., 750
watts, 6.5 amp
heating element
with grounded
three (3) prong plug
Insulation
Recommended
Supply Pressure
Shipping Weight Approximately
5.7 lbs.
30-125 psi
Meets U.L. 94HF-1
flammability
specification
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Sample Specification
Instant hot water dispenser(s) shall be
equipped with an InSinkErator Model HWT-00
stainless steel tank with adjustable
temperature from 160°F to 210°F.
We Come To You
®
3-Year In-Home
Limited Warranty*
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
The Next
Necessity
™
Printed in USA
1-800-558-5700
USA
Canada
www.insinkerator.com
1-800-558-5700
www.insinkerator.ca
The Emerson logo is a trademark
and a service mark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
©2016 InSinkErator, InSinkErator
®
is a business
unit of Emerson Electric Co. All Rights Reserved.
Certified to
NSF/ANSI 372
≤ 0.25% lead