Use and Care Manual
Installing the Disposer
4
Figure 2. Distance from Table Top to Mounting Flange
MOUNTING ADAPTORS
There are two adaptor categories for mounting InSinkErator disposers: Standard & Special Mountings.
Table 1 displays the approved disposer/mounting adaptor combinations.
PROPERTY DAMAGE
To avoid excess vibration, InSinkErator
recommends a minimum countertop thickness
of 16 gage stainless steel.
PERSONAL INJURY
• For safe operation, install the disposer in
compliance with the minimum distance illustrated
in Figure 2.
• Disposer must be properly installed to prevent
serious injury from moving shredder part.
Adaptor SS-50 SS-75 SS-100 SS-125 SS-150 SS-200 SS-300 SS-500 SS-750 SS-1000
12" Sink
15" Sink
18" Sink
No. 5
No. 5 short
No. 6
No. 7
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
X
X
X
X
X
O
O
X
X
X
X
X
O
O
X
X
X
X
X
O
O
X
X
SPECIAL STANDARD
Outward
Flange
Inward
Flange
Straight
Flange
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Table 1. Foodservice Disposer/Mounting Adaptor Combinations
X= Approved
O= Not Allowed
(will void warranty)
DISPOSER MOUNTING
7-3/8"
(187.33 mm)
7-3/4"
(196.85 mm)
2-3/4"
(69.85 mm)
18-7/16"
(468.31 mm)
2"
(50.80 mm)
24-1/4"
TO
32-1/2"
(615.95 mm
TO
825.50 mm)
(WITH
OPTIONAL
LEGS
INSTALLED)
24-4/5"
TO
33-4/5"
(629.92 mm
TO
858.92 mm)
(WITH
OPTIONAL
LEGS
INSTALLED)
23-3/4"
TO
31-1/8"
(603.25 mm
TO
790.58 mm)
6-13/16"
(173.04 mm)
6-13/16"
(173.04 mm)
4-7/8"
(123.83 mm)
6-3/8"
(161.93 mm)
1-1/2"
(38.10 mm)
3-3/8"
(85.73 mm)
6-1/2"
(165.10 mm)
7-11/16"
(195.26 mm)
17"
(431.80 mm)
8-3/4"
(222.25 mm)
8-3/4"
(222.25 mm)
7-1/8"
(180.98 mm)
13"
(330.20 mm)
3"
(76.20 mm)
SS-50 to SS-125 SS-150 to SS-200 SS-300 to SS-1000
6-5/8"
(168.28 mm)
6-1/2"
(165.10 mm)
6-5/8"
(168.28 mm)
6-1/2"
(165.10 mm)
6-5/8"
(168.28 mm)