Installation Guide

Slotted Screwdriver, Adjustable Pliers, Plumbers Putty, Electrical
Tape
Phillips Screwdriver, Drain Auger, 3/8" Electrical Clamp
connector, Wire Nuts (2), Second 1 1/2" Drain Trap, Hammer,
Hacksaw, Water Hose Clamp, Pipe Wrench, Copper Ground Wire,
dishwasher Drain Connection Kit, Air Gap, Electrical On/Off Switch,
Drain Tube Extension, 1/4" Allen Wrench
Mounting Assembly
A: Stopper
B: Sink Flange
C: Fiber Gasket
D: Backup Ring
E: Mounting Ring
F: Screws (3)
G: Snap Ring
Disposer
I: Lower Mounting Ring
J: Dishwasher Inlet
K: Discharge Outlet
Installation, Care & Use Manual
SAFETY SYMBOLS
Read through the entire Installation, Care &
Use manual before installing the disposer.
Determine which of the tools, materials, and
accessories you will need before you begin.
Make sure you have all necessary disposer
parts before installing the disposer (see part
TOOLS AND MATERIALS YOU WILL NEED:
TOOLS, MATERIALS, AND ACCESSORIES
YOU MAY NEED:
FOOD WASTE
DISPOSER
(1/3 HP Model FWD-1 & 1/2 HP Model FWD-2)
H
I
J
K
Warning indicates
a hazardous situation which,
if not avoided, could result in
death or serious injury.
Caution Notice is used to
address practices not related
to personal injury.
indicates
a hazardous situation which,
if
not
avoided, may result in minor or
moderate injury.
Discharge
L: Bolts (2)
M:Discharge Tube (1-1/2" Diam.)
N: Flange
O: Gasket
L
M
N
O
NOTICE
Part No. 76051 Rev B

Summary of content (6 pages)