MSDS

ManualsBrandsInsl-X ManualsPaintCabinet Coat 1-gal. Kit Includes White Trim and Cabinet Enamel with Applicators Sandpaper and Tack Cloth

---------------------------------------------------------------------------

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

---------------------------------------------------------------------------

CHEMICAL PRODUCT IDENTIFICATION:

PRODUCT ID . . . . . . . . . . : CC4510092-01

PRODUCT CLASS . . . . . . . . . : ACRYLIC PAINT, WATER BASED

TRADE NAME . . . . . . . . . . : CABINET COAT ENAMEL - WHITE

MSDS PREPARATION DATE . . . . . . : 09/11/2009

MANUFACTURER IDENTIFICATION:

NAME . . . . . . . . . . . . . : COMPLEMENTARY COATINGS CORP

dba INSL-X

ADDRESS . . . . . . . . . . . . .:101 PARAGON DRIVE

MONTVALE, NJ 07645

TELEPHONE . . . . . . . . . . . .: (800) 225-5554

EMERGENCY CONTACT . . . . . . . .: CHEMTREC

EMERGENCY TELEPHONE . . . (US). .: (800) 424-9300

EMERGENCY TELEPHONE (OUTSIDE US): (703) 527-3887

---------------------------------------------------------------------------

SECTION 2 - COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS

---------------------------------------------------------------------------

CAS# 13463-67-7

TITANIUM DIOXIDE

PCT BY WT: 10 - 30

EXPOSURE LIMIT:

ACGIH TLV/TWA: 10 mg/cu m(Total Dust) - TWA

OSHA PEL/TWA: 10 mg/cu m(Total Dust) - TWA

LD50: Oral (Rat)- >10000 mg/kg

---------------------------------------------------------------------------

***************************************************************************

This product contains no reported carcinogens or suspected carcinogens

according to the information provided in Section 3 of this MSDS.

***************************************************************************

This product contains pigments, which may become a dust nuisance when

removed by abrasive blasting, sanding, or grinding.

***************************************************************************

---------------------------------------------------------------------------

SECTION 3 - HAZARDS IDENTIFICATION

---------------------------------------------------------------------------

POTENTIAL HEALTH EFFECTS

EYES: Primary irritant.

SKIN: This product may cause skin irritation or rash upon repeated or

prolonged contact.

INHALATION: With poor ventilation, vapor or spray mist may irritate

respiratory mucous membranes, causing headache & nausea.

INGESTION: Swallowing small amounts of this product during normal

handling is not likely to cause harmful effects, but

swallowing large amounts may be harmful.

ROUTE(S) OF EXPOSURE

Exposure may be inhalation and/or skin or eye contact, depending on

conditions of use.

CARCINOGENICITY

Summary of content (6 pages)

PAGE 1
--------------------------------------------------------------------------SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION --------------------------------------------------------------------------CHEMICAL PRODUCT IDENTIFICATION: PRODUCT ID . . . . . . . . . . : CC4510092-01 PRODUCT CLASS . . . . . . . . . : ACRYLIC PAINT, WATER BASED TRADE NAME . . . . . . . . . . : CABINET COAT ENAMEL - WHITE MSDS PREPARATION DATE . . . . . . : 09/11/2009 MANUFACTURER IDENTIFICATION: NAME . . . . . . . . . . . . .
PAGE 2
--------------------------------------------------------------------------COMPLEMENTARY COATINGS CORP MATERIAL SAFETY DATA SHEET CC4510092-01 --------------------------------------------------------------------------No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. CHRONIC EFFECTS: None recognized.
PAGE 3
--------------------------------------------------------------------------COMPLEMENTARY COATINGS CORP MATERIAL SAFETY DATA SHEET CC4510092-01 ----------------------------------------------------------------------------------------------------------------------------------------------------SECTION 6 - ACCIDENTAL RELEASE MEASURES --------------------------------------------------------------------------STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED Ventilate as described in Section 8.
PAGE 4
--------------------------------------------------------------------------COMPLEMENTARY COATINGS CORP MATERIAL SAFETY DATA SHEET CC4510092-01 --------------------------------------------------------------------------Physical State . . . . . . . . . . . .: LIQUID Boiling Point Range . . . . . . . . . : Lower - 212.0 °F Higher - 212.0 °F Specific Gravity . . . . . . . . . . : 1.252 Weight per Volume . . . . . . . . . . : 10.4199 LB/GL VOC - Total (lb/gal). . . . . . . . . : .398 Evaporation Rate . . . . . . .
PAGE 5
--------------------------------------------------------------------------COMPLEMENTARY COATINGS CORP MATERIAL SAFETY DATA SHEET CC4510092-01 ----------------------------------------------------------------------------------------------------------------------------------------------------SECTION 14 - TRANSPORT INFORMATION --------------------------------------------------------------------------DOT HAZARD CLASS . . . . . . . . : N/A DOT PACKAGING GROUP . . . . . . . : N/A DOT LABEL . . . . . . . . . . . .
PAGE 6
--------------------------------------------------------------------------COMPLEMENTARY COATINGS CORP MATERIAL SAFETY DATA SHEET CC4510092-01 --------------------------------------------------------------------------*************************************************************************** Abbreviations used: int.- interior; ext.