SDS

ManualsBrandsInsl-X ManualsPaint1-gal. Satin Rubber-Based White Swimming Pool Paint

SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name

RUBBER-BASED SWIMMING POOL PAINT, SATIN WHITE

Product Code

RP-2710

Alternate Product Code

XA0701

Product Class

SOLVENT THINNED PAINT

Color

White

Restrictions on use

No information available

2. HAZARDS IDENTIFICATION

Classification

This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

Germ cell mutagenicity Category 1B

Carcinogenicity Category 1B

Label elements

_____________________________________________________________________________________________

Page 1 / 12

Revision Date: 05-Dec-2014

Danger

Flammable liquids

Manufacturer

Benjamin Moore & Co.

101 Paragon Drive , NJ 07645

Phone: 800-225-5554

insl-x.com

Category 3

Hazard statements

May cause genetic defects

May cause cancer

Revision Number: 1

Flammable liquid and vapor

Emergency Telephone Number(s)

CHEMTREC (US): 800-424-9300

CHEMTREC (outside US): (703)-

527-3887

Appearance liquid Odor little or no odor

Summary of content (12 pages)

PAGE 1
SAFETY DATA SHEET Revision Number: 1 Revision Date: 05-Dec-2014 1. PRODUCT AND COMPANY IDENTIFICATION Product Name Product Code Alternate Product Code Product Class Color Restrictions on use RUBBER-BASED SWIMMING POOL PAINT, SATIN WHITE RP-2710 Manufacturer Benjamin Moore & Co. 101 Paragon Drive , NJ 07645 Phone: 800-225-5554 insl-x.com Emergency Telephone Number(s) CHEMTREC (US): 800-424-9300 CHEMTREC (outside US): (703)527-3887 XA0701 SOLVENT THINNED PAINT White No information available 2.
PAGE 2
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Keep away from heat/sparks/open flames/hot surfaces, no smoking Keep container tightly closed Ground/bond container and receiving equipment
PAGE 3
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ Skin Contact Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. If skin irritation persists, call a physician. Inhalation Move to fresh air. If symptoms persist, call a physician. If not breathing, give artificial respiration.
PAGE 4
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ NFPA Legend 0 - Not Hazardous 1 - Slightly 2 - Moderate 3 - High 4 - Severe The ratings assigned are only suggested ratings, the contractor/employer has ultimate responsibilities for NFPA ratings where this system is used.
PAGE 5
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ Technical measures/Precautions Ensure adequate ventilation. Use only where airflow will keep vapors from building up in or near the work area in adjoining rooms. Comply with all national, state, and local codes pertaining to the storage, handling, dispensing and disposal of flammable liquids.
PAGE 6
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ 9. PHYSICAL AND CHEMICAL PROPERTIES Specific Gravity pH Viscosity (cps) Solubility Water Solubility Evaporation Rate Vapor Pressure Vapor Density Wt. % Solids Vol. % Solids Wt. % Volatiles Vol.
PAGE 7
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Product Repeated or prolonged exposure to organic solvents may lead to permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal.
PAGE 8
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ Ethyl benzene LD50 Oral: 3500 mg/kg (Rat) LD50 Dermal: > 5000 mg/kg (Rabbit) LC50 Inhalation (Vapor): 55000 mg/m3 (Rat, 2 hr.
PAGE 9
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ 12.
PAGE 10
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ 13. DISPOSAL CONSIDERATIONS Waste Disposal Method Dispose of in accordance with federal, state, provincial, and local regulations. Local requirements may vary, consult your sanitation department or state-designated environmental protection agency for more disposal options.
PAGE 11
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ CAS-No 1330-20-7 100-41-4 91-20-3 Chemical Name Xylene Ethyl benzene Naphthalene Weight % (max) 15 5 1 Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61) This product contains the following HAPs: Chemical Name Xylene Ethyl benzene Naphthalene CAS-No 1330-20-7 100-41-4 91-20-3 Weight % (max) 15 5 1 State
PAGE 12
RP-2710 - RUBBER-BASED SWIMMING POOL PAINT, Revision Date: 05-Dec-2014 SATIN WHITE _____________________________________________________________________________________________ Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer, has chosen to provide them.