Assembly Instructions For Fast-Efficient-Friendly Service Please call toll free: 1-800-782-3876 or e-mail RTAHELP@furniturebrands.com TV Stand 433-065 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
It’s easy! Broyhill easy-to-assemble furniture is easy to put together. Just follow these step-by-step instructions carefully, and you will have furniture that is both attractive and functional. The Broyhill name is your assurance of quality. If you have any questions about your new furniture, just call 1 800 RTA-FURN (1 800 782-3876) between 8:00 a.m. - 5:00 p.m., Monday through Friday (Eastern Time). Holiday weekends will not be staffed.
Screws are shown actual size. Hardware may be shown smaller than actual size. Note: For reasons of manufacturing efficiencies, you may find extra hardware and unused holes in parts.
Note: All parts may not be identified with labels, but to help identify certain parts, you may see one or more types of labeling. One type is the peel-off label and the other is an ink-print on one of the unfinished edges.
B Bottom (1) 43-7/16" x 19-11/16" 80182053 A Top (1) 44-7/16" x 19-3/16" 80182052 C Right Side (1) 19-3/16" x 17-7/8" 80182054 D Left Side (1) 19-3/16" x 17-7/8" 80182055 F Adjustable Shelf (2) 19-7/8" x 14-3/8" 80182057 H Door (2) 21-1/4" x 18" 80182058 5 E Partition (1) 19-3/16" x 14-5/8" 80182056 O Back Panel (1) 41-9/16" x 20-3/4" 80182059
1 Cam Housing (CH) CH CH E CH Figure 1 CH CH Make sure arrow in cam housing is facing the hole in the edge of panel. CH D CH Hole in edge of panel CH CH C CH • SEE FIGURE 1...Insert 9 x cam housings (CH) into the holes in left side (D), right side (C), and partition (E).
2 4MM Hex-Wrench (S1) 2" Hex-Head Screws Finished Edges Up D Unfinished Side E C B S4 Unfinished Edge • Attach bottom (B) to left side (D), right side (C), and partition (E), using S4 screws x 9. 4MM hex-wrench is provided. Note: Make sure heads of screws (S4) are flush with bottom (B).
3 Foot B • Screw (5) base feet into the inserts in bottom (B).
4 (CS) Cam Studs CS A • Screw cam studs (CS) x 9 into the holes, as shown, in top (A).
5 1/2 turn clockwise Arrow Do not overtighten Finished Edge D Finished Edge A E C • Attach top (A) to left side (D), right side (C), and partition (E). • Lock cam housings with a half turn clockwise of a standard flat-head screwdriver.
6 Back Panel (O) Nail B • With a helper, place unit on its front, as shown. • Position back panel (O), notch as shown, even with the bottom edge of bottom (B) and pilot holes align with partition (E). • Make sure panel (O) fits square and even side to side. If it doesn't, adjust unit into square by pushing or pulling on one corner of the unit until back panel fits squarely. • While nailing into pilot holes, take care to hammer nails in straight. Back Panel adds stability to the unit.
7 • Push shelf pins into the holes at the height you desire in left side (D), partition (E), and right side (C). 8 • Position the shelves on top of shelf pins.
9 BEFORE INSTALLING THE DOORS, READ THIS HELPFUL HINT: IF YOU CANNOT INSTALL DOORS (H) WITH EASE, unlock the 9 cam housings in the top edge of panels (D, E & C). Unlock cam housings with a half turn counterclockwise of a standard flat-head screwdriver. View without Top (A), ONLY to make the cam housings more visible.
10 A Left Door (H) B • Place the lower runner guides in left door (H) into the back guide track in bottom (B). • Press the buttons in and up in the upper runner guides to allow upper runner guides to insert into the guide track in top (A).
11 A B Right Door (H) • Place the lower runner guides in right door (H) into the front guide track in bottom (B). • Press in and up on the exposed runner guide button in the upper runner guide to allow upper runner guide to insert into the guide track in top (A). SEE NEXT STEP TO LOCK OTHER UPPER RUNNER GUIDE IN PLACE. 12 • Reposition left and right doors, as shown, to expose the other upper runner guide in right door.
13 (FD) Felt Disc FD • Peel the sticky backing and place (2) adhesive felt disc (FD) onto left and right doors (H), as shown.
14 Cover Caps • Decorative cover caps are provided to cover all exposed cam housings on finished panels.
IMPORTANT Do not exceed the recommended weight limits on the designated panels. Exceeding these limits could cause sagging, possibly resulting in failure of the panels or bodily injury. 15 lbs. 95 lbs. 25 lbs. 15 lbs. 25 lbs. • Peel backing and attach Warning Label to top (A). This label is to remain on top (A). This unit has been designed for up to a 45" LCD/ plasma and no more than 95lbs. or up to a 27" CRT.
A touch-up pen has been provided for any touch up needed. That's it! You've finished assembling your TV Stand.
Broyhill Instrucciones de Montaje Para un servicio rápido, eficiente y amigable, favor de llamar al número gratuito: 1-800-782-3876, o notifíquenos por correo electrónico a RTAHELP@furniturebrands.com. 433-065 Mueble para Televisor Este folleto de instrucciones contiene información IMPORTANTE sobre la seguridad. Favor de leerlo y guardarlo para futura referencia. ¡Es Fácil! Los muebles listos-para-armar de Broyhill son fáciles de ensamblar. Ud.
Los tornillos se muestran en su tamaño verdadero. Puede ser que los herrajes para el montaje se muestren en tamaños más reducidos que los actuales. Nota: Por razones de eficacia en la fabricación, es posible que se incluyan herraje extra, y agujeros que no serán usados.
Nota: Es posible que no todas las piezas lleven etiquetas, pero para ayudarle a Ud. a identificar ciertas piezas, puede ser que vea Ud. uno o más tipos de etiqueta. Uno es de etiqueta engomada despegable y el otro está impreso con tinta en uno de los bordes sin acabado.
3. (S3) Tornillo de 3” pulgadas de cabeza arandela, redonda Consejo Útil Las cabezas de los tornillos (S3) estarán empotradas en el bloque de soporte (I). Bloque de soporte para los rieles (I) Agujeros escariados Vea el Consejo Útil...Utilizando los tornillos (S3) x 4, asegure el soporte (I) a la moldura delantera superior (K1). 4.
8. Medio giro en sentido del reloj Flecha No lo sobreapriete Borde con acabado Borde con acabado Asegure la pieza superior (A) al panel lateral izquierdo (D), el panel lateral derecho (C) y la partición (E). Fije las cajas de cierre (CH), dándoles medio giro en sentido del reloj, utilizando un destornillador común de punta plana. 9. (S1) Tornillo de 1-1/8” pulgadas de cabeza arandela, redonda Vea el Consejo Útil...Utilizando los tornillos (S1) x 4, asegure la moldura (K1) a la pieza superior (A).
12. Espigas de soporte para los anaqueles Inserte las espigas de soporte en los agujeros del panel lateral izquierdo (D), la partición (E) y el panel lateral derecho (C), a la altura que Ud. desee. 13. Coloque los anaqueles de manera que se apoyen sobre las espigas de soporte. Borde con acabado 14. Tiradores (S2) Pernos de 3/8’ de pulgada para el herraje Utilizando (2) pernos (S2) en cada tirador, asegure éstos a las puertas (H). 15.
16. Antes de instalar las puertas, lea Ud. este Consejo Útil: SI NO PUEDE UD. INSTALAR LAS PUERTAS (H) CON FACILIDAD, primero, suelte las (9) cajas de cierre (CH) en el borde superior de los paneles (D, E y C). Se pueden soltar las cajas (CH), utilizando un destornillador común de punta plana y dándoles medio giro en sentido contrario a las agujas del reloj. Vista del mueble, sin la pieza superior (A), SÓLO para hacerle a Ud.
19. Coloque de nuevo las puertas izquierda y derecha, tal como las mostramos, de manera que se exponga la otra guía corredera superior en la puerta derecha. Para insertar la guía corredera superior en el riel de la pieza superior (A), presione el botón hacia adelante y hacia arriba. 20. (FD) Discos de fieltro Quíte el papel engomado de la tira y pegue (2) discos de fieltro adhesivos (FD) en las puertas izquierda y derecha (H), según se muestran. 21.