ASSEMBLY & OPERATION MANUAL RECORD SERIAL NUMBER HERE www.inspirefitness.net by Health In Motion LLC Jan.
TABLE OF CONTENTS Section Description……………………………………………………. Page Important Safety Instructions………………………………………. 1 Parts List…………………………………………………………………………. 2 Exploded Diagram…………………………………………………………. 3 Assembly Instructions……………………………………………………. 4 Decal Reference……………………………………………………………… 10 Decal Placement……………………………………………………………… 11 General Maintenance Information…….…………………………… 12 Limited Warranty……………………………………………………………..
IMPORTANT SAFETY INSTRUCTIONS Please read this entire manual and familiarize yourself with all decals and warnings before using this ab crunch bench. • WARNING! It is necessary to inspect this ab crunch bench regularly to maintain safety and proper function. Please use the maintenance schedule included towards the back of this manual. Immediately replace any and all defective or worn parts. See General Maintenance section for complete details.
PARTS & HARDWARE LIST Item # Description Part Number Quantity 1 Front Support Assembly GM540-300-001PZ 1 2 Knurled Foot Tube Assembly GM540-381-002PZ 2 3 Seat Assembly GM540-240-001 1 4 Rear Support Assembly GM540-300-002PZ 1 4-1 Left Connection Assembly GM540-320-001PZ 1 4-2 Right Connection Assembly GM540-320-002PZ 1 4-3 Flexible Connection Assembly GM540-380-002PZ 1 4-4 Pivot Assembly GM540-380-001PZ 1 4-5 Extension Assembly GM540-380-003 1 5 Seat Pad Assembly G
10 9 10 2 1 9 5 2 11 8 10 10 6 16 12 10 3 13 10 4-2 4-4 7 4-3 13 10 12 13 16 10 14 16 15 15 4-1 15 13 12 10 4-3 15 12 4-5 4 16
2 10 9 2 10 9 1 Step 1 A Attach the Knurled Foot Tube Assembly (2) to the Front Support Assembly (1) using 1- M10x25 Hex Screw (9) and 1- M10 Flat Washer (10). Tighten all hardware now.
1 10 10 12 11 3 10 10 12 Step 2 A Attach the Seat Assembly (3) to the Front Support Assembly (1) using 2- M10x70 Hex Screws (11), 4- M10 Flat Washers (10) and 2- M10 Lock Nuts (12). Hand tighten now.
3 13 13 10 12 10 4 12 Step 3 A Attach the Rear Support Assembly (4) to the Seat Assembly (3) using 4- M10x25 Hex Bolts (13), 8- M10 Flat Washers (10) and 4- M10 Lock Nuts (12). Tighten all hardware from Steps 2 & 3.
5 10 13 3 13 10 13 Step 4 A Attach the Seat Pad Assembly (5) to the Seat Assembly (3) using 4- M10x25 Hex Bolts (13) and 4- M10 Flat Washers (10). Tight all hardware now.
14 6 10 14 4 Step 5 A Attach the Head Pad Assembly (6) to the Rear Support Assembly (4) using 2- M10x55 Hex Bolts (14) and 2- M10 Flat Washers (10). Tight all hardware now.
8 7 15 16 16 15 16 16 4 Step 6 A Attach Left Handlebar Assembly (7) and Right Handlebar Assembly (8) to the Rear Support Assembly (4) using 2- M8x20 Hex Screws (15) and 2- M8 Flat Washers (16) on each side. Tight all hardware now.
DECAL REFERENCE Page 10
DECAL PLACEMENT ACB Badge "Demonstration Sticker" (underneath the ACB badge) "Warning, Pinch Point!" (on the bend) "Warning, Pinch Point!" (on the bend) "Warning Label" (on the Rear Support Assembly) ACB Serial Number PAGE 11
GENERAL MAINTENANCE INFORMATION Warning: DO NOT place styrofoam or printed materials on the orthopedic seat pads. Over time, these may stick to the pads and mar the surface. Do not leave items sitting on the orthopedic seat pads, these pads have a special density that takes shape to objects and small objects will leave imprints in the surface that may take time to come out. • Regularly inspect product for loose hardware. • Do not use or store equipment outdoors.
LIMITED WARRANTY In-Home Lifetime Warranty. This Warranty applies only in the United States to Inspire Strength products manufactured or distributed by Health In Motion LLC. The warranty period to the original purchaser is lifetime of the original purchaser.