Programmer's Manual

26 English Programmer Model 2740
Figure 3-7. Correct Positioning of Programmer Head over Generator
Programmer Head Strength Gauge
A strength gauge is located on the top of the programmer head (Figure 3-7) so that it can be observed when
the programmer head is positioned over the generator. The strength ratings are described in Table 3-2.
Note: The programmer head strength gauge will illuminate whenever communication is active, not just when
testing the connection.
Connecting to Generator
After testing the connection, maintain the good programmer head position and select the Connect to Generator
button on the Start screen. As the programmer connects to the generator, the tablet displays one or more of the
following Communication Screens described in Table 3-3. If necessary, take the recommended actions.
Generator not found
Electrical Interference
Table 3-2. Communication Strength Ratings