Programmer's Manual

54 English Programmer Model 2740
Table 4-4. Select a Patient Screen Buttons
To: Do This:
View patient Highlight patient name and select View Patient button
to access Reports screen.
Note: View Patient Button is disabled unless a patient
name is highlighted.
View next or previous
group of patients
Select the up or down arrow buttons at the bottom of
the screen.
Note: If arrow buttons are disabled, there are no
additional patients to view.
Delete a patient Highlight patient name and select Delete button to
display the Delete Reports screen (Figure 4-20).
• Specify a date using the arrow buttons to remove
all reports saved prior to that date.
• Select Delete button to confirm that you wish to
permanently remove all reports older than the
specified date for that patient.
Note: If a patient name is not highlighted before
selecting the Delete button, reports for all patients will
be deleted.
Export patient reports to
external USB flash drive
Attach the Inspire USB flash drive to the tablet.
• Highlight patient name and select the Export
button to display Export Report screen (Figure 4-
22). If Export button is disabled, go to Programmer
Settings screen to enable USB export.
• Specify a date using the arrow buttons to export all
reports since that date.
• Select the information to be included in the export
by checking one or more of the following boxes:
patient information, device information, waveform
screenshots, and advanced settings.
• Select Export button to complete export.
Note: If a patient name is not highlighted before
selecting the Export button, reports for all patients will
be exported.