Programmer's Manual

56 English Programmer Model 2740
The Current Report button on the Home screen accesses the Reports screen (Figure 4-21), where all session
reports for the current generator are organized by date and time. The Reports screen can also be accessed by
selecting the View Patient button on the Select a Patient screen.
Each report summarizes the patient therapy status, recorded levels, and stimulation and sensing settings for a
given session. Blue highlighted information with a check mark indicates changes made during the session.
Advanced settings display only if the initial or final value differs from the default value. Saved waveforms also
display.
From this screen, session reports for the current patient can be deleted or retained for records.
Refer to Table 4-5 for information about the functions of the buttons on the Reports screen.
Table 4-5. Reports Screen Buttons
To: Do This:
View selected report Select the date and time of the desired report in the left column of the screen.
View additional reports Select the up or down arrow buttons below the list of reports in the left column
of the screen.
Note: If arrow buttons are disabled, there are no additional reports to view.
View additional sets of
recorded levels
Select the right or left arrow buttons above the levels information.
Note: If arrow buttons are disabled, there are no additional levels to view.
Show or hide settings for the
displayed waveform
Select the Show Settings or Hide Settings button.
View additional waveform
screenshots
Select the right or left arrow buttons above the waveform image.
Note: If arrow buttons are disabled, there are no additional screenshots to view.