Programmer's Manual
Table Of Contents
- Explanation of Symbols
- How to Use this Guide
- Chapter 1: Therapy Overview
- Chapter 2: Programmer Components
- Chapter 3: Getting Started
- Chapter 4: Screen Descriptions
- Chapter 5: Clinical Programming Sessions
- Chapter 6: Troubleshooting
- Chapter 7: Warnings and Precautions
- Chapter 8: Supplemental Information
- Chapter 9: Inspire Medical Systems, Inc. Limited Warranty
Programmer Model 2740 English 71
Start Follow Up Workflow
From the Home screen select Start for the Follow Up workflow.
If minor amplitude and timing adjustments are desired, select the following Workflow option:
1. Select the Basic option.
2. Select the Next Step button.
If advanced programming and improvements in therapy effectiveness are desired, select the following Workflow
option:
1. Select the Advanced option.
2. Select the stimulation settings to be evaluated. One or both options can be chosen.
3. Select the Next Step button.
Figure 5-11. Follow Up Screen
Basic Follow Up
The following steps apply only to the Basic Follow Up.
1. Review the Stimulation and Timing settings.
Note: Pay attention to any Review flags that may appear.
2. Make desired changes using the arrows.
3. If there are any new settings to program in the generator, select the Configure button.
4. Select the Done button.