Programmer's Manual
Table Of Contents
- Explanation of Symbols
- How to Use this Guide
- Chapter 1: Therapy Overview
- Chapter 2: Programmer Components
- Chapter 3: Getting Started
- Chapter 4: Screen Descriptions
- Chapter 5: Clinical Programming Sessions
- Chapter 6: Troubleshooting
- Chapter 7: Warnings and Precautions
- Chapter 8: Supplemental Information
- Chapter 9: Inspire Medical Systems, Inc. Limited Warranty
76 English Programmer Model 2740
Figure 5-17. End Follow-Up - Home Screen
Retain Records
Export a session report if desired. See “Exporting a Report” on page 81 for instructions.
Sleep Study
The goal of a Sleep Study is to evaluate the patient’s response to therapy. A polysomnogram (PSG) is used to
evaluate sleep quality.
Sleep Study Overview
• Attach Programmer Head
• Place Programmer Cable in Night Mode (Optional)
• Start Session
• Review Therapy Status
• Start Sleep Study Workflow
• End Session
• Retain Records
Attach Programmer Head
After the sleep technician wires the patient for the PSG, complete the following steps to attach the programmer
head:
1. Route programmer cable over the patient’s shoulder.
2. Select the Test Connection button from the tablet or the programmer cable.
3. Move programmer head around implanted generator to find best location for a good signal strength
considering all sleep positions. Monitor the strength gauge on the tablet screen or programmer head.