Programmer's Manual
Table Of Contents
- Explanation of Symbols
- How to Use this Guide
- Chapter 1: Therapy Overview
- Chapter 2: Programmer Components
- Chapter 3: Getting Started
- Chapter 4: Screen Descriptions
- Chapter 5: Clinical Programming Sessions
- Chapter 6: Troubleshooting
- Chapter 7: Warnings and Precautions
- Chapter 8: Supplemental Information
- Chapter 9: Inspire Medical Systems, Inc. Limited Warranty
Programmer Model 2740 English 81
Exporting a Report
1. Attach the Inspire USB flash drive to the tablet.
2. Select the Reports button on the Start screen.
3. Highlight the patient’s name and select the View Patient button.
4. Confirm that the correct session report is displayed and select the Export button.
Note: If Export button is disabled, go to Programmer Settings screen to enable USB export. Select Export
Selected Report button to export the current report only.
5. Select Export Combined Visit Report button to export a report that combines programming sessions from the
same visit.
Note: The option to export combined reports will only be available if multiple reports are detected within a
+/-24-hour period.
6. Select the information to be included in the export by checking one or more of the following boxes: patient
information, waveform screenshots, and advanced settings.
7. Select Export button to complete the export.
Note: Session reports will be exported as PDF (portable document format) files. The programming log contains a
CSV (comma separated value) file of all generator setting changes for the session and a CSV file of the raw
waveform data.