Installation & Assembly
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment. Please read all instructions carefully before starting the assembly process. Perform all assembly steps on a flat, soft, non-abrasive surface. Do not
over-tighten the screws. CAUTION: Some items and/or the components are cumbersome and heavy. Therefore, the assistance of one or more people is
recommended in order to prevent personal injury and insure that the item and/or its components are not damaged during the assembly process.
Step I. On a flat, soft, non-
abrasive surface, insert top
support brace (C) and lower
support brace (D) into side panels
(A). When inserting the top
support brace (C), make certain
the panel is positioned so the
knobs are closer to the bottom of
the brace.
Step II. Connect each shelf (B) to
the side panels (A) by using:
washer (H), spring washer (G),
30MM screw (F), Allen wrench (I).
Do NOT tighten the screws until
all have been inserted. Once all
screws have been inserted,
securely tighten each of the
screws using the Allen wrench (F).
See Figure 1.
Page 1
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
For questions, missing parts or defectives, please contact Peak Season at 1-866-563-1732 or customerservice@peakseasoninc.net
Assembly Instructions Parsons Garden Shelf Model # 8507900-0135000
Parts & Hardware
Figure 1