GO 3 User Manual GO 3 User Manual
GO 3 User Manual Contents Product Introduction ........................................................................................1 Standard Accessories ................................................................................................... 2 First Use .............................................................................................................................. 4 Charging ......................................................................................................
GO 3 User Manual Product Introduction 1. Microphone 2. Lens 3. GO 3 Button 4. Camera Indicator Light 5. Charging Point 6. Speaker 1 1. Flip Touchscreen 2. Action Pod Indicator Light 3. Shutter Button 4. Power Button 5. Charging Point 6. Quick Button 7. Mounting Latch 8. Release Switch 9.
GO 3 User Manual Standard Accessories GO 3 and the Action Pod can be mounted on different accessories for flexible shooting wherever you go. Accessories Description Magnet Wear the Magnet Pendant by Pendant placing it inside your clothing. Figure Then, attach the camera to the front of the Magnet Pendant. Attach the Angle Adjustment Insert to the back of the Magnet Pendant to adjust the angle. Note: If you have a pacemaker, do not use this accessory due to its magnetism.
GO 3 User Manual Pivot Stand Can be used with GO 3 or the Action Pod. How to Use: 1. Press the buckles on the two sides of the Pivot Stand and attach GO 3 or the Action Pod onto it. Make sure the camera's direction is the same as the camera mark on the Pivot Stand. 2. Remove the silicone protective cover from the base of the Pivot Stand and stick the Pivot Stand onto a clean, flat surface. Stick to a flat, clean surface.
GO 3 User Manual Notes: The base of the Pivot Stand can be disassembled. The 1/4'' mounting point on the bottom of the Pivot Stand supports use with other accessories. Easy Clip Insert GO 3 into the Easy Clip and ensure it is secure. Attach the Easy Clip onto the edge of a hat or other object and adjust it to the desired angle. First Use Charging Use the Type-C to Type-A fast charging cable included in the box to connect the USB-C port of the GO 3 Action Pod to a USB-C charger.
GO 3 User Manual Place GO 3 camera inside the Action Pod and connect the charging cable to the Action Pod. While charging, both the camera and the Action Pod's indicator light will be solid red. The corresponding indicator light will turn off when the device is fully charged. Once both indicator lights turn off, both devices are fully charged. Note: It is recommended to use a dedicated charger for GO 3.
GO 3 User Manual Basic Use Action Pod Button Instructions: Power Button: • Press once: ￮ Power on GO 3. ￮ Wake GO 3 up（when GO 3 is not in the Action Pod）. ￮ Turn the Action Pod's touchscreen on/off. • Long press for 2 seconds: Power off (release the button when the power-off animation appears). • Long press for 7 seconds: Force shutdown. Shutter button • Press once: ￮ Take a photo or start/stop video recording.
GO 3 User Manual Quick Button • Single press: Press once to enter the preset menu or switch shooting modes. Press again to switch between different modes or presets. The first time you press this it will enter the Shooting Mode page by default. Tap the switch icon in the upper left corner to enter the Presets page. GO 3 Button Instructions: • Press once: ￮ Take a photo or start/stop video recording. ￮ Confirm connection on the app (when connecting for the first time).
GO 3 User Manual Using GO 3 and Action Pod: • Using them together: When the camera is in the Action Pod, it functions as one action camera and the buttons on the camera body are disabled. You can control the camera with the buttons on the Action Pod or via the app. • Using them separately: When GO 3 is taken out of the Action Pod, you can use the Action Pod for remote control and live preview up to 16ft (5m) away. The buttons on the camera body are enabled.
GO 3 User Manual GO 3 Camera Button customization: The button functions of the GO 3 camera can be customized according to your preferences. You can adjust them through the app settings page or within the Action Pod.
GO 3 User Manual Using the Touchscreen The touchscreen's main display shows the current camera shooting mode. The menu bar shows battery level, storage capacity, and current shooting parameters. By swiping or tapping the screen, you can achieve the following: Tap the screen Swipe down from the top Swipe left and right in the center Hide/show information on the Enter the camera settings. Switch shooting mode. touchscreen.
GO 3 User Manual Shortcut Menu 1. Storage: Shows the remaining number of photos or the length of video footage that can be stored on the microSD card. 2. Lock screen 3. Timed Capture 4. Preset 5. Wi-Fi Signal 6. Bluetooth: This will be displayed when the camera is not in the Action Pod. 7. GO 3 Battery Status 8. Action Pod Battery Status 9. Shooting Mode: Click the icon and swipe to select a different shooting mode.
GO 3 User Manual Shooting Description mode Video Shoot a normal video. FreeFrame Shoot a video with the option to choose your aspect ratio after recording. video Timelapse Suitable for shooting static timelapse videos. TimeShift Take a hyperlapse (sped-up) video while moving. Slow Motion Shoot a slow-motion video at 120fps. Loop Video can be recorded continuously, but only the latest clip is kept to save storage Recording space.
GO 3 User Manual Camera Settings Swipe down on the touchscreen to view camera settings. 1. Screen Orientation: Turn on/off. It is turned on by default. 2. Lock Screen: Tap to lock screen. Swipe up on the touchscreen to unlock. 3. Volume Control: Set the camera speaker volume. There are four options: High, Medium, Low, and Mute. The default is Medium. 4. Adjust Brightness: Slide the bar to adjust the screen brightness. 5. QuickCapture: Turn on/off. 6. Voice Control: Turn on/off. 7.
GO 3 User Manual Shooting Specification Settings Swipe up from the bottom of the touchscreen to view shooting specification settings.
GO 3 User Manual Shooting Parameter Settings Swipe left from the right edge of the touchscreen to see the shooting parameter settings.
GO 3 User Manual TimeShift Filters, Shutter, ISO, WB, EV Slow Motion Filters, Shutter, ISO, WB, EV Loop Recording Filters, Shutter, ISO, WB, EV, Low-light Stabilization Starlapse Shutter, ISO, WB, EV Interval Shutter, ISO, WB, EV HDR Photo AEB, WB, EVs Album Page Swipe right from the left of the Touchscreen to enter the Album page. Storage There are three options available for GO 3's internal storage capacity: 32GB, 64GB, and 128GB.
GO 3 User Manual Indicator Lights GO 3 and the Action Pod have separate LED status indicator lights.
GO 3 User Manual Insta360 App Connect to the Insta360 app 1. Click here to download the Insta360 app. Alternatively, search "Insta360" in the App Store or Google Play Store to download the Insta360 app. 2. Press the Power Button to turn on GO 3. 3. Enable Wi-Fi and Bluetooth on your smartphone. 4. Open the Insta360 app and click the camera icon at the bottom of the page . Follow the on-screen instructions to activate your camera. 5.
GO 3 User Manual Android Mode 1. Place GO 3 camera is in the Action Pod and connect GO 3 to your Android phone with the USB-C cable. 2. A notification for Android Mode will pop up. 3. Open the Insta360 app to control the camera and access the camera's footage. App Interface Enter the shooting interface of the app and the following icon functions can be seen. Some of the icon functions are only available in some shooting modes.
GO 3 User Manual Transfer files between the Insta360 app and your Windows PC - iPhone 1. Install iTunes on your PC. Connect your iPhone to your PC, open iTunes, then complete the authorization process according to the instructions. 2. After successful authorization, click the iPhone icon in the top left corner, and the iPhone's files will appear. 3. Click "File Sharing" and choose "Insta360" from the list.
GO 3 User Manual Transfer files between the Insta360 app and your Mac iPhone 1. Connect iPhone to your Mac. 2. In the Finder window on your Mac, select your iPhone. 3. At the top of the Finder window, click Files, then do one of the following: ￮ Transfer from Mac to iPhone: Drag a file or a selection of files from your Mac onto the Insta360 app in the list.
GO 3 User Manual Maintenance Firmware Update Firmware updates will be regularly available for both GO 3 and the Action Pod to ensure that they run efficiently. Please update to the latest version for optimal results. Before updating, make sure that GO 3 and the Action Pod have at least 25% battery remaining. Update via Insta360 app: Connect GO 3 to the Insta360 app. The app will notify you if there is a new firmware update available. Follow the on-screen instructions to update the firmware.
GO 3 User Manual Waterproofing 1. GO 3 (when taken out of the Action Pod) is waterproof up to 16ft (5m). The included Lens Guard must be installed on the camera for underwater use. 2. The Action Pod is IPX4 water resistant only when GO 3 is installed. It protects against light rain and snow, but should not be submerged in water or used for activities involving high-velocity water, such as action sports during rainy weather, surfing, and waterskiing. 3.
GO 3 User Manual Arashi Vision Inc. ADD: 11th Floor, Building 2, Jinlitong Financial Center, Bao'an District, Shenzhen, Guangdong, China WEB: www.insta360.com TEL: 400-833-4360 +1 800 6920 360 EMAIL: service@insta360.com V1.
