INSTABILITY MATERIAL SAFETY DATA SHEET Instabind™ Regular Binding Style Instabind™, by Bond Products™, is a truly miraculous solution to rug finishing. Now, you can finish your carpet on-site and bind around mountainside corners and circles with ease.
1A STABBING ADHESIVE TAPE M ET . IDENTIFICATION a. 413-30 Adhesive transfer tape b, Scrim reinforced, double-sided tape il. PHYSICAL DATA a. Solubility in water: Negligible b, Volatility st 100° C: Less than 0.1% ill. HAZARDOUS INGREDIENTS a. None IV. FIRE AND EXPLOSION HAZARD DATA a. Flash point. N/A b. Flammable omits: N/A c. Extinguishing media: Water, dry chemicals, foam, CO; d. Unusual fire hazards: Produces dense black smoke if burned V. HEALTH HAZARD DATA a.
2B INST ARIA POLY TAPE MADS SHEET . IDENTIFICATION a. 100% Polyester . HAZARDOUS INGREDIENTS Chemical name CAS Number % a. Acetic Acid 64-19-7 1 b. Propagandist N/A 0.1 c. Caustic (Sodium hydroxide) 1310-73-2 1 d. Thereabout 62-56-6 0.1 e. Monocotyledon Ether N/A 0.1 f. Formaldehyde 50-00-0 0.1 fil. PHYSICAL DATA a. Form and color: Fabric b. Specific Gravity: 1.34 ¢. Melting point: Approx. 480° F d. Boiling point: N/A e. Solubility in water: N/A V. FIRE AND EXPLOSION HAZARD DATA a. Ordinary combustible b.
3C INSTABILITY GLUE MDSE SHEET {. IDENTIFICATION a. Product Name: L72-2034 b, Product description: Diner acid based poly amide resin ¢. Poly amide resin d. CAIRN: 68139-80-0 il. COMPOSITION INFO a. This product doesn’t contain any hazardous chemical as defined by the ZOSMA Hazard Communication Standard (29 CFR 1910.1200 . HAZARDS IDENTIFICATION a. Static electricity may be created when handling b. Use proper grounding methods when using near flammable or explosive materials ¢.
4D POLYESTER WADDING MADS SHEET 1. IDENTIFICATION a. 8/32" Perplex F2 . PHYSICAL DATA a. Polyester yarn b. Ply bleached wadding H. MANUFACTURING PROCESS a. Wadding braided together b. Secured by polyester yarn ¢. Ends welded and secured by plastic plug V. SAFETY a. Nona-hazardous b. Non-reactive c. Use water, dry chemicals, or dry powder to put out any fires Date of issue: March 21, 2013 Prepared by: Brian Milne President Bond Products, Inc. 4511 Wayne Ave.
