Product Datasheet/Brochure

TheInstallBay.com
FAX YOUR ORDER 800.647.8091
TOOLS
80
®
IB25600 EA
Hooded probe protects your fingers and automatically
centers the wires. Small size allows easy use even in the
tightest places. Works up to 28 volts.
HANDY CIRCUIT TESTER
IB27450 COMPUTER SAFE EA
Works without damaging sensitive electronic components.
Safe for use on 12 volt automotive computer circuits. Tool
draws less than 21 M.A. at 12 volts D.C. With an operating
range of 3-12 Volts.
• Red glow - positive
• Green glow - negative
CIRCUIT TESTER
IBN-899 EA
Will quickly help you isolate noise problems and locate the
correct speaker wires in a car. Runs on a single 9v
battery and has both RCA and alligator clipped outputs.
TONE GENERATOR
3410 EA
Helps to quickly identify if there is voltage present on wiring
and circuits. Ergonomic grip design with 6-foot test leads.
Transparent handle shows bright LEDs to identify
connections:
Green = Ground Present
Red = Voltage Present
TEST LIGHT / CIRCUIT TESTER
76600 HI–VIS VOLTPRO CIRCUIT TESTER EA
High visibility, simple to use, one handed dynamic voltage
testing. Indicates power and grounds. Test the circuit’s
ability to deliver current and identify loose, corroded
or broken wires. Capture intermittent spikes or drops in
voltage. Take voltage snapshots in any mode, any time.
• Dynamic voltage drop testing
• Power and ground LED indicators
• Min/max glitch capture
PISTOL & VOLT PROBE
3320 10 MEGOHM/UL EA
Auto-Ranging™ scales eliminate the need to dial in the
correct range when making electronic measurements.
10 MegOhm input impedance for safe automotive and
household uses. Large digital display. Single-setting
resistance function for voltage (AC & DC). Color-coded
LED’s display battery quick check. Protective rubber corner
guards for drop protection. Includes attachable test leads,
holders and stand.
AUTO-RANGING DMM
NAVONE
ENGINEERING
TESTERS + GENERATORS + PROBES + MULTIMETERS
• Computer safe
• Voltage snapshot
EA-PT9A EA
The PT-9A allows the install technician to verify the absolute
phase of each speaker in the system, both individually
and as a group. Features a built-in microphone and comes
with a test CD that includes in polarity and out of polarity
pulses (in addition to 11 other useful test tracks). Adds a
built in pulse generator for both speaker level and low level
connections directly to a component (speaker amplifier,
signal processor, etc). The PT-9A also comes with a
protective carrying case and test leads.
PHASE TESTER
MM400 AUTO RANGING EA
• Measures up to 600V AC/DC voltage, 10A AC/DC current
and 40 MΩ resistance
• Measures capacitance, temperature, frequency, duty-cycle,
and test diodes and continuity
• CAT III 600V safety rating
AUTO MULTIMETERS
MM300 MANUAL RANGING EA
• Measures up to 600V AC/DC voltage, 10A AC/DC current
and 2MΩ resistance
• Tests batteries, diodes and continuity
• CAT III 600V safety rating
MANUAL MULTIMETERS