Quick Guide

11
Getting Started |
3
Remove & Install Float Valve
The oat valve has 2 positions. It pops up
to indicate when the cooker is pressurized,
and lowers into the lid when the cooker
is depressurized.
Remove: Place one nger on the at top of oat
valve. Turn lid over. Detach silicone cap from
bottom side of oat valve. Remove oat valve
from top of lid. Do not discard oat valve or
silicone cap.
The oat valve and silicone cap must be
installed before use to seal in pressurized steam.
Clean after each use.
Install: Drop oat valve into oat valve hole on
top of lid. Place one nger on the at top of oat
valve. Turn lid over. Attach silicone cap to bottom
of oat valve.
CAUTION
While oat valve is up, contents of cooker are pressurized. Do not attempt to remove lid. Refer to “Venting Methods” section in this Guide for
information on releasing pressure.
Top Bottom
DepressurizedPressurized