Quick Guide

8
| Getting Started
2
Check Sealing Ring & Sealing Ring Rack
Remove: Pull sealing ring out from behind sealing ring rack.
Inspect sealing ring rack. It should be centered in the lid and an
even height all the way around.
Sealing ring must be installed before use.
Install: Place sealing ring over sealing ring rack and press into
place. Ensure entire sealing ring is snug behind sealing ring rack.
After closing the lid, the sealing ring creates an airtight seal
between lid and cooker base.
The sealing ring is an integral part of product safety. Replace your sealing ring every 12-18
months or when deformation or damage is noticed.
Remove
Install
CAUTION
Always check for cuts or deformations in sealing ring prior to cooking. Only
use authorized Instant Pot
®
sealing rings. Failure to follow these instructions
may cause food to discharge, which may lead to personal injury or property damage.
CAUTION
Sealing rings may stretch over time. Do not use a stretched or damaged
sealing ring. If puckering occurs, replace sealing ring.