Quick Guide

9
Getting Started |
3
Remove & Install Float Valve
The oat valve has 2 positions. It pops up to indicate
when the cooker is pressurized, and lowers into the
lid when the cooker is depressurized.
Refer to “Venting Methods” section in this Guide for information on
releasing pressure.
Remove: Place one nger on the at top of oat
valve. Turn lid over. Detach silicone cap from
bottom side of oat valve. Remove oat valve from
top of lid. Do not discard oat valve or silicone cap.
The oat valve and silicone cap must be installed
before use to seal in pressurized steam.
Install: Drop oat valve into oat valve hole on top
of lid. Place one nger on the at top of oat valve.
Turn lid over. Attach silicone cap to bottom of oat
valve.
Depressurized
Top Bottom
Pressurized
CAUTION
While oat valve is up, contents of cooker are pressurized. Do not touch the oat valve while the cooker is pressurized. Do
not attempt to remove the lid while the cooker is pressurized.