User's Manual

Delay Start

Delay Start can be used with all Smart Programs with the exception of Sear/Sauté, Sous Vide and Yogurt.

Use the following as a guideline for how to use the Delay Start program.

1. Connect the power cord to a 120V outlet. Multicooker will enter Standby mode.

2. Select your desired Smart Program by pressing the key.

3. Press + and – under Temp to set the temperature.

4. Press + and – under Time to set the cook time.

Note: You will not be able to return to this screen without cancelling the program entirely, so it is important to remember

to input your cooking time before setting the Delay Start timer.

5. Press Delay Start to turn the setting on. The LED above the key will light up.

6. Press + and – under Time to set the desired delay start time.

7. After 10 seconds, the multicooker will beep and the Delay Start countdown will begin. The

number displayed on the screen represents the amount of time before your meal will start cooking.

Note: Changes to the Delay Start time may not be made once the timer has started. To adjust the time, press Cancel and enter

your new selections.

Temperature: Fahrenheit & Celsius

Press Cancel to ensure the multicooker is in Standby mode. Under Temp, press and hold the + and – keys

together for 5 seconds to toggle between °F and °C.

Sounds

All Sounds OFF: Press and hold – under Time for 5 seconds.

All Sounds ON: Press and hold + under Time for 5 seconds.

Note: Error code alerts cannot be silenced.

Advanced Functions