User's Manual
14
How to Use Slow Cook
1. Place ingredients in the cooking pot.
2. Connect the power cord to a 120V outlet. Multicooker will enter
Standby mode.
3. Select the Slow Cook Smart Program.
4. Press Slow Cook again to toggle between Low and High cooking
temperatures.
5. After 10 seconds, the multicooker will beep three times and begin the
cooking process.
How to Use Sear/Sauté, Stew, Roast, Bake & Steam
Select a recipe and use the following steps as a guide to help you start cooking. For more specic cooking
instructions, please refer to your recipe.
1. Connect the power cord to a 120V outlet. Multicooker will enter Standby mode.
2. Select your desired Smart Program, for example: Bake.
3. Customize the time: Press + and – under Time to set the desired time.
4. Customize the temperature: Press + and – under Temp to raise or lower the temperature, as required.
5. After 10 seconds, the multicooker will beep three times and begin the cooking process. The display will
show the pot icon and show ON while the multicooker preheats, with the exception of the Steam and
Stew programs which display the cook time countdown immediately. Place ingredients in the cooking
pot when the multicooker has reached target temperature.
NOTE: The temperature setting on Steam is pre-set, and cannot be modied. Only the cooking time can be adjusted.
Sear/Sauté, Stew, Roast, Bake & Steam
2
3 4 5
The display will show the heating icon and cooking time, and the countdown will begin immediately.
Note: The default temperature setting for Slow Cook program is Low.