Operation Manual

20
10 Display remains blank
aer connecng the
power cord
Bad power connecon or no
power.
Inspect the power cord to
ensure a good connecon,
check the power outlet is
acve.
Cooker’s electrical fuse was
blown
Contact support online
11 All LEDs
ash with
a code
appearing
on screen
C1 code Faulty temperature sensor
(cannot be detected)
Contact support online
C2 code Faulty temperature sensor
(short circuited)
Contact support online
C5 code Temperature is too high be-
cause inner pot is not placed
Put in the inner pot properly
Temperature is too high be-
cause there is no water in
inner pot
Put food and water in the
inner pot
C6 code Faulty pressure sensor Contact support online
12
Rice half cooked or too
hard
Too lile water Adjust dry-rice and water
rao according to recipe
Cover opened prematurely Aer cooking cycle com-
pletes, leave the cover on
for 5 more minutes
13 Rice too so Too much water Adjust dry-rice and water
rao according to recipe
14
Intermient beeping
aer the cooker starts
for a while
Indicaon of overheang.
The cooker has reduced the
heang temperature, and
may not reach cooking pres-
sure
Possibly starch deposits at
the boom of the inner pot,
which have clogged heat
dissipaon. Stop the cooker
and inspect the boom of
the inner pot
Occasional cking or
light cracking sound
The normal sound of power
switching and expanding
pressure board in changing
temperature
Nothing to be worried about
15
Wet inner pot boom. Wipe inner pot boom dry
before cooking
Troubleshoong Table (Cont… )
Problem Possible Reason Soluon