User's Manual

IPCAM User manual

IP address: Fill in the IP address assigned and make sure it is in the same subnet

as the gateway (i.e. the first three sections are the same)

Mask: The default subnet mask of the equipment is: 255.255.255.0

Gateway: Make sure it is in the same subnet with PC IP address .Default

Gateway address is 192.168.0.1

DNS: IP address of IPS network provider.

Port: LAN port assigned for the equipment, usually 80

User & Password: Default administrator username/password: admin. No

password

Enable Using DHCP the system will assign a reasonable IP address for your

equipment. Only if your gateway supports DHCP (It is the case with most

gateways).

NOTE: When the prompt “subnet doesn’t match, double click to change!” please

set the IP Camera IP address once again.

 Upgrade Firmware

Enter the correct User and Password to upgrade system Firmware and Web UI.