User's Manual

IPCAM User manual
Adding more cameras:
If you decide to add more cameras, you will need to change the port number for the other
cameras, such as 82,83,85. To access these cameras from the Internet, you would use:
http://192.168.1.124:82
 Upgrade Device Firmware
Upgrade Device Firmware and device embedded web UI software in this page.
Figure 2.11
 Restore Factory Settings
Restore factory settings of the device.
 Reboot Device
Reboot the device.
2.3.3.2 Network Settings

 Basic Network Settings
If the router and the IP camera connect has DHCP function, you can choose “Obtain IP
from DHCP Server” else fill in the network parameters manually.
16