User's Manual

IPCAM User manual
6) After around 30 seconds, if the LED blinks, it indicates it is working in WIFI mode.
7) Camera login. (details:2.2)
3.3 Connected to the Internet through ADSL directly
Figure 3.2
1) Use Network cable connect IP Camera to PC
2) Enter IP Camera Tool to set the basic configuration, (details:2.1)
3) Login the Camera homepage as Administration and enter ADSL Settings page
to input ADSL User name and password.
4) Enable DDNS service at the same time and Click <Submit> and to reboot the
Device, (details:2.3.3.2)
5) Connect IP Camera to the ADSL directly, you ca access the Camera from
Internet by domain name.
NOTE: Please choose the option “Report ADSL IP by Mail”, then it will send ADSL IP
to user by Email.
3.4 Using a router to access the Internet
Using a router to access the Internet by shared ADSL If a router is set for dial-up
Internet access, it is not required to set ADSL dial-up account and password on the IP
Camera.
31