User's Manual

IPCAM User manual
Step6: Now you obtained a Dynamic Domain Name (Figure 4.6), and can use it in
the DDNS Service Settings (details:2.3.3.2)
4.1.7 Why pop-up the prompt” Fail to connect to the device…”?
This prompt only appeared in the case of using multiple cameras.
Enter the Multi-Device Settings page(login as administrator) to check the Device
When you set multiple cameras, the color changed to yellow.
Figure 4.7
4.2 Default Parameters
Default network Parameters
IP address: dynamic obtain
DHCP: Disabled
DDNS: aipcam.com
38