User's Manual

IPCAM User manual
IP Camera terminal shall be installed in an indoor environment.
For firmware upgrading or connection with an external, refer to detailed instructions
contained in the CD.
2 SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double click the Icon “IP Camera
Tool” and a dialog box as Figure 2.1 will pop up.
Note: The software searches IP Servers automatically over LAN.
There are 3 cases:
1. No IP Cameras found within LAN. After about 1 minute search, the Result Field will
show “not found IP Server” and the program shut automatically.
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the
total number is displayed in the result field as shown in Figure 2.1
3. The IP Cameras installed within LAN do not share the same subnet with the monitoring
PC. A prompt as shown in result field (prompt: Subnet doesn’t match, double click to
change!).
Click the left mouse button to choose the prompt and click the right mouse, choose
Network Configuration to set the IP address of the Camera to the same subnet as LAN.
7