Operation Manual

Go to http://install.instar.com
9-EN
Step 6: Connect the connection ca-
ble with the camera according to the
drawing shown in Fig.6.
Step 7: Attach the camera unit to
the wall-mount. To do so, please
loosen the 3 screws at the wall
mount and then attach the camera
and tighten the screws again.
5.3. Ceiling Mount
Fig. 6 Fig. 7
Step 2: Connect the connection
cable to the camera according to
Fig.2.
Step 1: Drill the holes according to
the drilling template. Put the cable
through the ceiling. Use the deliv-
ered screws and dowels to mount the
bracket onto the ceiling.
Step 3: Loosen the screws on the
neck of the bracket, put the cam-
era in position and x it on to the
bracket by tightening the screws
again.
Fig. 1 Fig. 2
Fig. 3