Operation Manual
Go to https://install.instar.com
4-EN
3. Product Features
Hardware
Image Sensor WQHD Sony STARVIS CMOS Sensor / Resolution 2560 x 1440px
Wide-Angle Lens Exchangeable 4.3mm lens with a ~90º diagonal eld of view
MicroSD Card Max. 128GB (32GB incl.) for alarm or manual recording (15 sec.)
PIR Sensor Integrated Panasonic passive infrared motion detector
Mic / Audio Out Integrated microphone and audio output (3.5mm Jack)
Cable entry Individually usable cable entry for power, network and audio
Software
Privacy Areas Mask areas for privacy concerns
Alarm Areas Dene four areas for software motion detection and link with PIR
Alarm Triggers Supports motion, heat and noise detection
Pre-Recording Alarm videos start three seconds before the trigger event
Notications Alarm emails and push (text) notications in case of an alarm trigger
Smart IoT Smarthome Integration by Alarmserver, MQTT(S) and HTTP(S) API
Video Recording 15s alarm and/or manual recording on MicroSD
Video Stream Supported protocols RTSP, HTTP (HTML5), ONVIF, MJPEG...
Photo Series Interval snapshots for website integration or time lapse videos
Intercom Two-way audio with our InstarVision app
Connectivity
P2P Free point-2-point connectivity with InstarVision, works with IPv6
DDNS Free DDNS address to connect to your camera via the internet
Cloud Optional upload & management of alarm videos in the INSTAR Cloud
FTP Upload Upload alarm images / videos to an FTP server (FTP or secure FTPS)
WPS Use WiFi Protected Setup (WPS) to easily establish a WiFi connection
WiFi 2,4/5Ghz WiFi, Wi-Fi 5 802.11ac with WPA2 encryption
HTTPS Access the WebUI via HTTPS with secure TLS/SSL encryption