Color Change Kit Instructions
KeypadLinc
™
Button Change Kit
2401AL6, Almond 6-Button
Introduction
Easily change the KeypadLinc frame and button
color. The frame and buttons can be changed
before or after KeypadLinc is installed in the wall.
However, it is easier to do the changes prior to
installing KeypadLinc.
During the changeover process, the power and the
load may remain on and operating. There are no
dangerous voltages or unsafe areas while the
button plate is removed.
Kit Contents
• 1 frame that replaces the frame currently
installed on a KeypadLinc
• 1 skeleton button plate
• 6 colored opaque buttons
Disassembling KeypadLinc
1) If KeypadLinc is installed in the wall, remove
the wallplate
2) Remove the four Phillips screws that hold the
frame and buttons to the metal bracket
3) Pull the entire frame straight away from the
switch. Also pull away the button plate
assembly (the plastic pieces the button caps
are attached to). You may have to wiggle the
bottom of the frame to get it free of the bottom
Set button.
6-Button Assembly
S
keleton Button
Plate
Center
Frame
Button
Caps
Frame