Owners manual

19
The Wall Outlet LED will blink if it detects
Insteon communication. By default, this
feature is disabled.
Prevents changing any settings using the set
button or tap-and-hold programming.
Software-Only Features
Beep on Button Press Blink on Trac
Disable Local Programming Error Blink
The Wall Outlet LED will blink red once if one
or more responders do not acknowledge
a message and will blink green once if all
responders successfully acknowledge a
message. By default, this feature is enabled.
The Wall Outlet will beep every time one of its
buttons are tapped. By default, this feature is
disabled.