Open/Close Sensor Owner’s Manual 2843-222 (US) Rev 1.
About Open/Close Sensor ...........................................................................................................................................2 Open/Close Sensor Hardware ....................................................................................................................................2 Installation.....................................................................................................................................................................
Detects whether magnet is within ½” of the main case: • Closed state when magnet is within ½” • Opened state when magnet is further than ½” Set Button • Links other Insteon devices (responders) • Controls linked responders (scene 1): Tap to toggle between on and off External Sensor Terminals When using an external sensor, Open/Close Sensor is in closed state when either external sensor terminals or reed switch are closed.
Connecting an External Sensor to Open/Close Sensor NOTE: For basic use of Open/Close Sensor’s external sensor terminals, it is not recommended to also use Open/Close Sensor’s internal reed switch to help ensure desired behavior. If connecting multiple sensors to Open/Close Sensor’s external sensor terminals and/or using Open/Close Sensor’s reed switch in addition to an external sensor, see Advanced External Sensor Use.
Make Open/Close Sensor a Controller of Multiple Responders 1) Press and hold Open/Close Sensor set button for 3 seconds LED will start blinking green 2) Tap Open/Close Sensor set button LED will start double-blinking green 3) For each responder you are adding: a. Adjust responder to desired scene brightness/state b.
Using Internal Reed Switch and External Sensors When Open/Close Sensor external sensors input is used in conjunction with its internal reed switch, Open/Close Sensor behaves much like several sensors connected in parallel (above), meaning: • Open/Close Sensor will be open when both internal reed switch and external reed switch sensor terminals show open • Open/Close Sensor will be closed when either internal reed switch or external sensor terminals show closed Power Restore Open/Close Sensor stores all of
Software configurable Yes RF range Up to 150 feet (50 meters) open air* *Range may vary due to local interference Insteon device category 0x10 (all frequencies) Insteon device subcategory US 0x02 EU 0x06 AUS/NZ 0x07 Mechanical Case color White Set button Yes Dimensions Main Case: 3.46" x 1.32" x 0.76" (88mm x 34mm x 19mm) Magnet: 2.28" x 0.55" x 0.43" (58mm x 14mm x 11mm) Weight 3.
Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
